UVILIZERS - Getting Started UVILIZERS - Getting Started



General Instruction For Using Your New UVILIZER Light Sanitizer:

 

1.   Remove the product from it's packaging and examine the device. Please contact us if you notice any signs of damage the product might have sustained during shipping.

2.   Depending on the model of your device, you will need to either insert the batteries (4 x AAA, not included) or charge the unit using USB cable included with the device.  Typically fully charging Li-on battery will take 1-3 hours. 

Note - RAZOR models could be operated by supplying power via USB cable but do not contain a rechargeable battery.

3.   Once charged or batteries have been inserted into the device, it is ready to start disinfecting.  Different models might contain various child safety features such as 3 second power button or child power lock switch.  Point the lamp away from your body and face and turn it on. 

Important - Never shine UV light at your eyes or at unprotected skin. 

4.   With UV light on, wave the light slowly over the surface you are disinfecting at a distance of 2-4 inches, moving the light around and covering all areas multiple times.  It takes 5-10 seconds to disinfect the surface and there is no harm in sanitizing surface longer than 10 seconds.

  

For more detailed information please select your exact UVILIZER model below:

 

UVILIZER Razor    UVILIZER Extra        



General Instruction For Using Your New UVILIZER Light Sanitizer:

 

1.   Remove the product from it's packaging and examine the device. Please contact us if you notice any signs of damage the product might have sustained during shipping.

2.   Depending on the model of your device, you will need to either insert the batteries (4 x AAA, not included) or charge the unit using USB cable included with the device.  Typically fully charging Li-on battery will take 1-3 hours. 

Note - RAZOR models could be operated by supplying power via USB cable but do not contain a rechargeable battery.

3.   Once charged or batteries have been inserted into the device, it is ready to start disinfecting.  Different models might contain various child safety features such as 3 second power button or child power lock switch.  Point the lamp away from your body and face and turn it on. 

Important - Never shine UV light at your eyes or at unprotected skin. 

4.   With UV light on, wave the light slowly over the surface you are disinfecting at a distance of 2-4 inches, moving the light around and covering all areas multiple times.  It takes 5-10 seconds to disinfect the surface and there is no harm in sanitizing surface longer than 10 seconds.

  

For more detailed information please select your exact UVILIZER model below:

 

UVILIZER Razor    UVILIZER Extra        

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page